A review study on titanium niobium oxide-based composite anodes for Li-ion batteries: Synthesis,structure, and performance

The growing demands for Li-ion batteries (LIBs) in the electrification revolution, require the development of advanced electrode materials. Recently, intercalating titanium niobium oxide (TNO) anode materials with the general formula of TiNb_xO_2+2.5x have received lots of attention as an alternative to graphite and Li₄Ti₅O₁₂ commercial anodes. The desirability of this family of compounds stems from their high theoretical capacities (377–402 mAh/g), high safety, high working voltage, excellent cycling stability, and significant pseudocapacitive behavior. However, the rate performance of TNO-based anodes is poor owing to their low electronic and ionic conductivities. TNO-based composites generally are prepared with two aims of enhancing the conductivity of TNO and achieving a synergic effect between the TNO and the other component of the composite. Compositing with carbon matrices, such as graphene and carbon nanotubes (CNTs) are the most studied strategy for improving the conductivity of TNO and optimizing its high-rate performance. Also, for obtaining anode materials with high capacity and high long-term stability, the composites of TNO with transition metal dichalcogenides (TMDs) materials were proposed in previous literature. In this work, a comprehensive review of the TNO-based composites as the anodes for LIBs is presented which summarizes in detail the main recent literature from their synthesis procedure, optimum synthesis parameters, and the obtained morphology/structure to their electrochemical performance as the LIBs anode. Finally, the research gaps and the future perspective are proposed.     

超高效液相色谱-飞行时间质谱法快速分析测定山药中7种常见杀菌剂

目的 建立超高效液相色谱-飞行时间质谱检测山药中7种常见杀菌剂的分析方法。方法 样品经乙腈提取，水浴氮吹至近干，丙酮定容，经超高效液相色谱-飞行时间质谱检测。结果 在正离子模式下，7种杀菌剂在水-甲醇（均含有0.01%甲酸和5 mmol/L甲酸铵）流动相中都具有较好的响应；0.01~0.40 mg/L范围内线性良好，相关系数R均大于0.999。不同温度（50℃、70℃）水浴实验结果表明70℃水浴温度符合实验要求。三个浓度水平的加标回收实验的回收率为70.75％～108.07％，相对标准偏差为 0.02％～5.01％。结论 该方法操作简单、分析准确，满足山药中常见杀菌剂的检测要求。     

Long-term performance analysis of chemical filters in clean rooms based on a prediction model

Chemical filters are the most important devices for removing gas-phase pollutants in clean rooms. However, the testing concentration of chemical filters is too high for reflecting their performance in a real clean room environment. This study tested the adsorption performance of chemical filters in the two most commonly used shapes at different concentrations. Then, the Langmuir equation and Wheeler-Jonas kinetic equation were combined to establish an adsorption performance prediction model of chemical filters under actual conditions. The predicted values of the model were in good agreement with the experimental results, which indicated the high accuracy of the prediction model. The model does not need to test the microscopic parameters of the adsorbent and can maintain high accuracy at low concentrations. A fast method for calculating the service life of chemical filters was also presented. Based on this model, the total cost of using a chemical filter with a high carbon content in microelectronic clean rooms could be decreased by 45% due to decreasing the number of filter replacements over 3 months. So a chemical filter with a high carbon content should be preferred over a filter with low resistance in microelectronic clean rooms.     

超高效液相色谱-串联质谱法同时检测糕点中6种甜味剂

目的建立超高效液相色谱-串联质谱法同时测定糕点中6种常用合成甜味剂的分析方法。方法选用超纯水作为提取溶剂,涡旋和超声提取后,低温离心,取部分上清液加入正己烷除脂,Waters Atlantis■T3色谱柱、甲醇-5 mmol/L甲酸铵(含0.1%甲酸)作为流动相、亲水亲脂平衡型固相萃取柱HLB(hydrophile-lipophile balance)净化。结果6种甜味剂在质量浓度为10~200 ng/mL的曲线范围内呈良好线性关系,相关系数r均大于0.999,平均加标回收率在85.0%-98.2%之间,相对平均偏差(relative standard deviation,RSD)为1.3%~6.7%。结论该方法具有前处理简单、灵敏度高、检测速度快等优点,适合糖精钠、甜蜜素、三氯蔗糖、阿斯巴甜、阿力甜、纽甜的检测,但不适用于安赛蜜的检测。     

A survey of dairy goat kid-rearing practices on Canadian farms and their associations with self-reported farm performance

Although future production of dairy goats is influenced by kid-rearing practices, little is known regarding which practices maximize kid growth, welfare, and future production success. The objectives of this survey study were to (1) identify common rearing practices of Canadian commercial dairy goat farms and evaluate their associations with 6 farm performance indicators and (2) determine if farms could be grouped by management style on the basis of the 6 performance indicators and compare rearing practices common across the different groups. A survey was sent by post or electronic media to reach dairy goat producers across Canada. The questionnaire contained 70 questions on the following areas of kid rearing: kidding management, care of newborn, colostrum management, milk and solid feeding in the preweaning period, health management, disbudding, housing conditions, weaning strategies, record keeping and growth monitoring, and farm performance data. Performance indicators, calculated on self-reported data, were 305-d milk production, preweaning mortality rate, diarrhea and respiratory disease prevalence, average daily gain from birth to weaning, herd milk production, and replacement rate. A total of 175 questionnaires were returned. After applying inclusion criteria, including herd size (≥40 goats) and completeness of surveys, 104 respondents from Ontario (n = 72, 69%), Québec (n = 23, 22%), and the Western provinces (n = 9, 9%) were retained for analysis, representing 29% of all Canadian producers. Farm sizes ranged from 42 to 2,500 (median = 190) goats. A large amount of variation in rearing practices and farm performance was found between farms. Colostrum and milk feeding management were found to be associated with all performance indicators except for kid respiratory disease prevalence, with timing of colostrum delivery and feeding method accounting for most the associations within each of the 2 areas. Replacement rate was mostly affected by whether or not kids were reared with their dam. Herds surveyed in the study could successfully be divided into 3 distinct groups (production-focused, longevity-focused, and low performance), representing different management styles on the basis of farm self-reported performance levels. Rearing practices found to be associated with higher farm performance could be targeted by advisory services to help improve management practices on Canadian dairy goat farms.     

Human responses to high levels of carbon dioxide and air temperature

In this study, 30 subjects were exposed to different combinations of air temperature (T_a: 24, 27, and 30°C) and CO₂ level (8000, 10 000, and 12 000 ppm) in a high-humidity (RH: 85%) underground climate chamber. Subjective assessments, physiological responses, and cognitive performance were investigated. The results showed that as compared with exposure to T_a = 24°C, exposure to 30°C at all CO₂ levels caused subjects to feel uncomfortably warm and experience stronger odor intensity, while increased mental effort and greater intensity of acute health symptoms were reported. However, no significant effects of T_a on task performance or physiological responses were found. This indicated that subjects had to exert more effort to maintain their performance in an uncomfortably warm environment. Increasing CO₂ from 8000 to 12 000 ppm at all T_a caused subjects to report higher rates of headache, fatigue, agitation, and feeling depressed, although the results were statistically significant only at 24 and 27°C. The text typing performance and systolic blood pressure (SBP) decreased significantly at this exposure, whereas diastolic blood pressure (DBP) and thermal discomfort increased significantly. These effects suggest higher arousal/stress. No significant interaction effect of T_a and CO₂ concentration on human responses was identified.     

Analysis of the water-soluble compounds as a tool for discriminating traditional and industrial high moisture mozzarella made with citric acid

High moisture mozzarella from cow milk is a pasta filata cheese that can be manufactured by different protocols. Fermentation by autochthonous starter is used for the traditional product, whereas direct acidification with citric acid is widely used at industrial level. Both types are stored immersed in a liquid for preserving freshness, but this packaging method is known to favour the changes of the quality characteristics. The present study aimed to assess the evolution of the soluble compounds and to evaluate their use as chemical indices for discriminating the two types of mozzarella. The contents of lactose, organic acids, water-soluble nitrogen and free amino acids differently changed over time. The whole patterns of these soluble compounds allowed discrimination of the two products during the whole storage period. The simple analyses of lactic acid and lactose could be a rapid tool to protect traditional mozzarella from industrial imitations obtained with citric acid.     

Mechanical properties of Al2O3 and Al2O3/Al with Gyroid structure obtained by stereolithographic additive manufacturing and melt infiltration

To obtain both plasticity and toughness of the material at the same time, various manufacturing techniques of ceramic-metal composites and structures have been studied. In this work, a bio-inspired Al₂O₃ ceramic scaffold with Gyroid structure was designed and prepared by stereolithographic (SL) additive manufacturing, then the Al₂O₃/Al ceramic-metal hybrid structure was prepared by infiltrating molten Al into the Al₂O₃ ceramic structure. The performances of the Al₂O₃ ceramic scaffold and the Al₂O₃/Al ceramic-metal hybrid structure were compared and analyzed by a quasi-static compression experiment. The quasi-static compressive strength of the pristine Al₂O₃ scaffold was 14.36 MPa, while that of the Al₂O₃/Al ceramic-metal hybrid structure was up to 89.06 MPa. Moreover, the plasticity of the Al₂O₃/Al ceramic-metal hybrid structure was much higher than that of the Al₂O₃ scaffold. During compression, the Al₂O₃/Al ceramic-metal hybrid structure had excellent energy absorption, reaching up to 2569.16 KJ/m³, 15 times that of the Al₂O₃ scaffold. Therefore, this method can obtain materials with excellent ductility and toughness.     

Research on the effects of surface modification of ceramic powder on cure performance during digital light processing (DLP)

Digital light processing (DLP) is one of the most important additive manufacture technologies to fabricate ceramic parts with complex geometries. Compared with pure photosensitive resin, the cure performance of ceramic suspensions is obviously different due to the optical property change after the addition of ceramic powders. In this paper, a unique oxidation process was used to modify the optical properties of nitride powders including AlN and Si₃N₄. The properties of oxidized ceramics were investigated and the cure performance of ceramic suspensions was then characterized. The effect of oxidation time on cure performance was evaluated. The results showed that for AlN, oxidation process leads to the smaller cure depth and smaller excess cure width as compared with non-oxidized AlN and for Si₃N₄, oxidation process leads to the larger cure depth and larger excess cure width as compared with non-oxidized Si₃N₄, indicating that both refractive index and light absorbance of ceramic powders have obvious effects on cure behaviors. Additionally, the cure behavior of oxidized ceramic suspension in this study shows that the relationship of cure depth vs. incident energy agrees well with Beer- Lambert model, but the excess cure width vs. incident energy is not consistent with quasi Beer-Lambert model due to the nature of digital micromirror device (DMD).